1" 7050 aluminum plate
1" thick. Buy 7050 aluminum plate cut to size for aerospace machining. Check AMS 4050 requirements, plate tempers, sizes and mill certifications.
Choose your size
Width × length (inches)
Prices for 1 piece
Enter Custom Size
7050-T7451 aluminum plate
1" × 12" × 18"
Get pricing in Instant Quote.
View cartStandard saw-cut dimensions: +1/8″ / −0″. Mill certifications included. Select DFARS or Domestic above when required. Certification requirements · Calculate material weight · Need another size? Enter custom dimensions
Saw cuts and machining allowance
Our standard saw-cut tolerance is +1/8″ / −0″ on cut length and width. Allow material for facing and finish machining. A different tolerance agreed on your order takes precedence.
Plate thickness, flatness and surface condition follow the supplied mill or producer specification. Full mill-stock pieces ship uncut and retain mill tolerances.
Mill certificates with your order
Mill certifications are included. Open or download certificates for your assigned material from My Orders once available. Specify DFARS or Domestic when your order requires it.
A supplied T7451 plate certificate showing its product form and specification references. T7651 orders carry their own material certification.
7050-T7451 plate certificate example (PDF)Redacted example; your order’s certificate identifies the actual supplied material.
How to read a mill certificate
Open a section to compare cut sizes and prices. Availability and lead time are shown with the selected size.
T7451
- 1/4" (0.25") thick
- 1" thick
- 1 1/4" (1.25") thick
- 1 1/2" (1.5") thick
- 1 3/4" (1.75") thick
- 2" thick
- 2 1/4" (2.25") thick
- 2 1/2" (2.5") thick
- 2 3/4" (2.75") thick
- 3" thick
- 3 1/4" (3.25") thick
- 3 1/2" (3.5") thick
- 3 3/4" (3.75") thick
- 4" thick
- 4 1/2" (4.5") thick
- 5" thick
- 5 1/2" (5.5") thick
- 6" thick
- 6 1/2" (6.5") thick
- 7" thick
- 8" thick
Choosing a temper
7050 is used for thick aerospace plate where strength, toughness and stress-corrosion performance matter. Its lower quench sensitivity is useful in thicker sections.
7050-T7451 plate is associated with AMS 4050. T7451 and T7651 are distinct overaged, stress-relieved tempers: T7451 offers better stress-corrosion resistance, while T7651 offers higher typical strength. Select the exact temper the drawing requires; they are not interchangeable.
Machining and applications
Carbide tooling and cutting fluid are useful for heavy cuts and deep pockets. Confirm machining allowance and grain direction before ordering. Large pockets and thin finished walls benefit from a planned roughing sequence. Typical manufacturer values are not design allowables or guaranteed minima.
- Wing center sections and spar structures
- Fuselage frames and bulkheads
- Large machined aerospace components